Legal Notices
Agriculture Business Area Trimble Inc. Trimble Agriculture Division 10368 Westmoor Drive Westminster, CO 80021 USA trimble_support@trimble.com agriculture.trimble.com Copyright and Trademarks © 2014-2020, Trimble Inc. Trimble, the Globe & Triangle logo, Connected Farm, and FmX are trademarks of Trimble Inc., registered in the United States and in other countries. Autopilot, Precision-IQ, GFX-350, GFX-750 and TMX-2050 are […]
Android Permissions Settings
Location Setting for both the TMX-2050, GFX-750 and GFX-350 Display From the home screen, go to SETTINGS Select Location (under the “Personal” category) Turn On the Location Setting If Using GFX-750 or GFX-350 Display If using this app with the GFX-750 or GFX-350 display, then you must set the following permissions on the GFX-750 or […]
Utilization App
In the screen where you can access all apps on your display, tap the Utilization app to start it. The following is the Utilization app screen. It shows the operator (if available), vehicle status, vehicle thresholds, and implement thresholds. If you tap on the settings gear in the upper right corner, you can set how […]
Utilization App – Install or Update – This App Must be installed for TMX displays using Firmware 4.6 or higher or if using PIQ for FarmStream
The Utilization app should be installed automatically together with display firmware. You should see the Utilization app installed with all other apps on your display. If it is not present, or the utilization app needs to be updated, from the Launcher screen, tap on the App Central icon. Make sure that you have connectivity on […]
Setting up the Operator for FarmStream Reporting
Signing in as an operator is not required for Utilization or FarmStream to run, but if you want to see operator information in the application, you must sign in. In order to use operator login with PIQ, the Enable Operators (Operator Sign In) feature must be turned on. This feature can be turned on in […]
Settings in Precision-IQ to use FarmStream Reporting in the GFX-750 or TMX-2050 with Precision-IQ
To use the Utilization app and FarmStream Fleet reporting on the TMX-2050, GFX-350 or GFX-750 display with the Precision-IQ™ application, you must first set up the thresholds in the Precision-IQ app. In the Home screen, tap the Precision IQ icon to open the app. After opening Precision-IQ, you can set up the Implement and Vehicle […]
FarmStream Diagnostics – for FmX Display and the FmX Plus app
In the Configuration screen, the user can see the FarmStream diagnostics. This shows the current vehicle sensors being reported. The three sensors that are reported in the FmX+ app are Fuel Level, Fuel Rate, and Engine hours. Additional sensor data may be viewable in the Utilization app, depending on what sensors are reported by the vehicle.
Delay reasons
If delay reasons are enabled, and if the stopped to delayed timeout threshold is reached, the operator will be presented with a screen to explain the reason for the delay. This delay reason will be reported in the Trimble Ag Software.
Vehicle Monitoring – for the FmX Display and FmX Plus App
In the Monitoring tab you can select to send information about the vehicle speed to Fleet in the Trimble Ag Software. Any amount that the vehicle travels over this speed is reported as speeding. From the Configuration page, select Autopilot (Vehicle): Select the Monitoring tab. If you set the Maximum Moving Speed to Off this means that the […]