The Fleet website allows you to manage mixed fleets to help improve operator performance and overall efficiency. You can: View and download fleet positions overlaid on background imagery. Identify the current and historical status of vehicles such as moving, working, stopped, or off. Manage alerts. Monitor vehicle engine hours. Use the Fleet website to analyze […]
Traditionally, the DCM-300 modem has been the primary device used to communicate vehicle position, sensor data, and other information from a vehicle to the Fleet website. While the DCM-300 modem can still be used with Fleet, FarmStream is the preferred set up for Fleet. FarmStream uses a specially configured TMX-2050, GFX-750, GFX-350, or FmX display, […]
Product overview The Fleet website is used to manage farm operation data received from a range of vehicles and implements. You can access it through an Internet browser such as Apple Safari, Mozilla Firefox, or Google™ Chrome. Use the Fleet website to manage your vehicles. First establish a connection to a vehicle’s on-board communication device, […]
Refer to the following documentation: FarmStream and Traditional Fleet Feature Comparison Matrix Fleet User Guide FarmStream Fleet Setup Guide FarmStream Cable Guide
Version 10.01 is required for the FmX and Version 4.3.1 is required for the TMX using the FmX+ app. Version 5.5 or higher is required for TMX using the PIQ app. Version 1.5 or higher is required for the GFX-750 display. All versions of firmware for the GFX-350 display will support FarmSteram.
No. There is no need to provision the GX450 or SNM941 modem in FarmStream Fleet (ie associate it with a vehicle), the modem is just a router for the display.
The Vehicle Sync functionality requires a DCM-300 modem. The vehicle cannot use the Vehicle Sync functionality if no DCM-300 modem is installed.
Yes. AutoSync is only available on displays with Precision-IQ.
To run FarmStream Fleet on the FmX or TMX-2050 display using the FmX Plus app, you need the free FarmStream plugin. To run FarmStream with PIQ on the TMX-2050, GFX-350 or GFX-750 display you must enable operators as a first step and use the Utilization app. Firmware version 10.01 or higher is required for the FmX […]
Currently, FarmStream Fleet is available on the FmX, GFX-750, GFX-350 or TMX-2050 displays only. It is not available on the CFX-750™ display.
